• 9/10 surgeons prefer Biogel for fit, feel and comfort1

• Reduced chance of a hole with an industry-leading AQL* result of 0.651

• Every glove (100%) is air inflation tested and visually inspected for quality and safety1

• Improved efficiency as less gloves are wasted2

• Non-pyrogenic, potentially reducing the risk of post-operative complications

Recommended for all surgical procedures.

Biogel has an industry leading freedom from holes AQL* of 0.65. The industry standard requirement for AQL* is 1.5. The lower the number, the fewer the holes and the higher the quality of glove. Biogel is proven to have the lowest glove failure rate among major competitors. Non-Biogel gloves are at least 3.5 times as likely to fail than Biogel gloves.

• Natural rubber latex

• Straight finger and textured surface

• Biogel hydrogel polymer coating

• Beaded cuff

• Powder-free

• Non-pyrogenic

Contra-indications: This product contains natural rubber latex which may

cause allergic reactions including anaphylactic responses.

Allergenicity: Biogel gloves are produced to have low levels of aqueous

extractable protein and have been shown to have a low potential for

inducing allergic contact dermatitis or ‘Type IV allergy’.

Pyrogenicity: Each batch of Biogel gloves is tested to have a low endotoxin

level (< 20 EU/pair).

Product standards: Biogel gloves are tested and manufactured to the

following standards:

• Quality/Environmental: ISO 9001, ISO 13485, ISO 14001

• Product: ASTM D3577, EN455-1, EN455-2, EN455-3, EN455-4

• Sterilisation: Gamma irradiation

• Viral Penetration: Bacteriophage test, ASTM F1671

• Allergenicity/Pyrogenicity: ISO 10993 (PART 5 and 10)

Registering authority: In Europe the gloves are CE marked (notified body

BSi, number 0086) indicating compliance with Council Directive 93/42/EEC.

In US the gloves are FDA registered. Biogel Surgical gloves are a Class IIa

Product.

Storage: Store in a cool, dry place away from sources of heat or direct

sunlight.

Packaging: One pair per pack, in a high quality inner wrap, packed

into a film pack (constructed of a laminate of polyester and low-density

polyethylene). 50 pairs per collation case for sizes 5.5 – 8.5; 40 pairs for

size 9.0; 200 pairs per transit case for sizes 5.5 – 8.5; 160 pairs for size 9.0.

Disposal: Gloves & outer wrap dispose of as clinical waste. Paper inner

wrap, collation case & transit case can be recycled as paper or disposed of

as clinical waste.

Shelf life: Five (5) years from date of manufacture.

Manufacturer: Made and packed in Malaysia by Mölnlycke Health Care

Sdn Bhd.